88S12-PPI-01-D – PP88S12L71-TCD3.6
| Item: | 88S12-PPI-01-D |
| Model: | PP88S12L71-TCD3.6 |
Ratings |
|
| Rated HP | 111 HP |
| Control Box Type | LOFA CP750E |
| BEP Head - 1,800 rpm | 91 ft / 27.74 m |
| Max. HP | 134 hp |
| Max. Flow Rate - 60 Hz | 5040 gpm / 1144.71 m³/h |
| BEP Flow Rate - 1,800 rpm | 2425 gpm / 550.78 m³/h |
| Max. Head - 60 Hz | 180 ft / 54.86 m |
| Max. Solid Handling Size | 3 " / 7.62 cm |
| Fuel Tank | 135 gal / 511.03 L |
| Fuel Consumption | 0.09 gpm / 0.02 m³/h |
| Best Efficiency Point - 60 Hz | 69 % |
| Maximum Operating Speed | 2000 rpm |
Liquid |
|
| Max. Fluid Temperature | 200 °F / 93.33 °C |
Materials of Construction |
|
| Volute Material | Ductile Iron |
| Impeller Type | Enclosed |
| Impeller Material | CA6NM Stainless Steel |
| Bearing Frame Lubrication Type | Oil |
| Seal Material | Silicon Carbide / Tungsten Carbide / FKM / SS |
| Seal Type | Mechanical Seal |
| Coupling Material | Vulcanized Rubber |
| O-ring Material | Viton |
| Pump Shaft Material | 17-4 PH Stainless Steel |
| Wear Ring Material | ASTM A48 Class 40 Gray Iron |
| Priming Type | Pioneer Prime |
| Engine Brand | Deutz |
| Engine Model | TCD3.6L4 |
Dimensions |
|
| Discharge Type | Flat Face Flange - ANSI 150 |
| Discharge | 8 " |
| Impeller Dia. | 12.25 " / 311 mm |
| Suction | 8 " |
| Suction Type | Flat Faced Flange - ANSI 150 |
| Product Weight (Dry) | 5040 lb / 2286.11 kg |
| Product Weight (Wet) | 6000 lb / 2721.55 kg |
Other |
|
| Warranty Standard Time | 24 Months |
| Spec Sheet | |
| Owner's Manual | |
| Parts Breakdown | |
